ABOUT CHEQUERED PLYWOOD

Chequered Plywood is high-density exterior grade plywood produced under high heat & pressure using un-extended PF resin. The ply has a chequered pattern on its surface that comes from the wire mesh put during pressing. Because of high pressure, the panel develops high density that sustains the rigours of flooring in public use. The basic purpose of making Chequered plywood which is anti-slip and anti-skid is to accommodate it in the application of flooring that too in heavy vehicles and large containers. The advent of chequered ply manufacturers has revolutionized the flooring in those sectors and created fresh avenues in other sectors too.

Uses of Chequered Plywood:

Extensive use in transport (i.e. Flooring of bus, truck & Containers, etc.) and railways as slip-resistant floorboard material as well as in staircases everywhere, kitchens, edges of swimming pools, flooring in gardens and farmhouses, high-use Factory flooring,  Laboratories flooring, Flooring for cold storages.

Resin Coated Chequered Plywood:

Film Coated Chequered It is manufactured in India's best high-pressure hydraulic press with a selected wood veneer of high density.

An external coating of phenolic polymer film made in-house with imported craft paper gives a smooth and glossy finish which provides a smooth surface to the shuttering area. This plywood resists the corrosive action of cement, water, and sunlight. Because of its high density and waterproof properties, it gives more repetition in coating work.

Almunium Claded Chequered Plywood :

Almunium clouded chequered bus flooring consist of treated hardwood and five bar 1.5mm thick aluminium sheet is being manufactured in 3500-tonne capacity hot press by the hot & cold process, It is a high densified product and uses unsaturated polyester resin and high degree polymer phenolic resin for its composing.

APPLICATION:

Buses Deck, Heavy Automobile Floor, Paneling, Seats, Back Rest of Seats, It can be used for soundproofing, Reduction in temperature and vibrations.

ADHESIVE:

(a) BWP Grade

(b) Unsaturated Polyester resin with cobalt and celerator spread at all four sides of the aluminum sheet up to 4" wide.

THICKNESSES:

 9 to 12 mm SIZE: 8x4 feet Al. Sheet Thicknesses: 0.8 MM to 1.5 mm Density: 0.845 to 1.00 gm/cm3

Advantages of Chequered Plywood:

The most chequered Floorboards/Plywoods are treated on both sides with thermosetting phenolic resins and micro organism resistant chemicals. This treatment protects the board from chips, cracks, warps, twists, termites, fungus, rot, and abrasive action of water, sand, and extreme water conditions.